The control board is made by a carefully worked and painted
pressed-bended steel plate box. It is mounted on the generating set by
means of vibration dampers.
POWER SECTION
-
4 poles magneto-thermal circuit breaker
with differential device protection (current carrying capacity conforming to the generating set power)
-
Current tranformer for measuring circuits
-
Internal terminal board for connection to the Mains
CONTROLS
-
Starting engine key
-
Engine stop push-button
-
Reduced speed selector (for engines equipped
with electronic speed governor)
INSTRUMENTATION
-
Voltmeter
-
Voltmetric change-over switch
-
Ammeters tern
-
Frequency-meter
-
Hour-meter
-
Instruments protection fuses
-
Acoustic alarm
VISUAL SIGNALLING
(high intensity led)
-
Electronic card supply
-
Low oil pressure
-
High engine temperature
-
Over speed
-
Battery charger alternator
-
Fuel reserve
GENERATING SET PROTECTION
The Gen Set is controlled by the following protection devices
connected to the electronic card:
-
Low oil pressure / Fuel end
-
High engine temperature / low radiator water
level (for water cooling engine)
-
Over speed (for engine equipped with
electronic speed governor)
-
Fuel reserve
Visual alarms ae used for signalling in
case of defect. Signalling persists, even if the defect is cancelled.
The engine stop control is also activated (fuel reserve excluded).
OPTIONALS BY REQUEST
-
Oil pressure gauge
-
Water thermometer
-
Revolution counter
-
Kilowattmeter
-
Fuel level gauge
-
Energy counter
-
Emergency stop push-button
-
Motor driven-pump control circuit for the
automatic decanting from the external tank
TECHNICAL FEATURES
-
Supply voltage: 230 / 400 Vac (other to be
specified)
-
Auxiliary voltage: 12 Vdc or 24 Vdc
-
Frequency: 50 Hz or 60 Hz
-
Insulation: > 50 Mohm
-
Dielettric strength ac: 2500V/1'
-
Dielettric strength dc: 1000V/1'
-
Level of protection: IP 40 (other protection
levels as optional)
-
Colour: RAL 7032
-
Ambient temperature min/max -10 /
+60° C
-
Conforming to: CEI - IEC - EN
|